AAA Custom — custom printing & packaging
Get a Quote

DTF Transfers

Build Your Own Gang Sheet

Arrange as many designs as you want on a single sheet of DTF film to get the most prints for your money. Use the online builder to upload, resize and position your artwork, then add the sheet to your cart.

  • No minimum order
  • Full-color, ready-to-press film
  • 22"-wide sheets up to 240" long
  • Upload print-ready PNG with transparent background

Available sheet sizes

  • 22" × 24"
  • 22" × 36"
  • 22" × 48"
  • 22" × 60"
  • 22" × 72"
  • 22" × 84"
  • 22" × 96"
  • 22" × 108"
  • 22" × 120"
  • 22" × 144"
  • 22" × 180"
  • 22" × 240"

Starting at

$20.00per sheet

Estimated price — final pricing confirmed at checkout.

Already have a print-ready file?

Skip the builder and order by size, or send your file for a custom quote.

Heat-pressing instructions

  1. 1

    Pre-press the garment

    Pre-press the blank for 5–8 seconds to remove moisture and wrinkles, then let it cool for a moment.

  2. 2

    Position the transfer

    Place the DTF transfer film with the printed (ink) side down on the garment, exactly where you want the design.

  3. 3

    Press

    Press at roughly 300–315°F (150–160°C) for 12–15 seconds with medium-firm pressure. (⚠️ confirm exact settings with our team.)

  4. 4

    Cold or hot peel

    Let the film cool completely, then peel the carrier sheet slowly (cold peel). Some films allow a hot peel — check the instructions included with your order.

  5. 5

    Final press

    Cover with parchment or a Teflon sheet and press again for 8–10 seconds to lock the design and improve durability and wash resistance.

Settings are general guidance — exact temperature and time can vary by film. Contact us if you need confirmed settings for your order.

Care instructions

  • Wait before first wash

    Wait at least 24 hours after pressing before the first wash to let the adhesive fully cure.

  • Wash inside out, cold

    Turn the garment inside out and wash on a cold, gentle cycle with mild detergent. Avoid bleach and fabric softener.

  • Dry low or air dry

    Tumble dry on low or hang to air dry. High heat over time can shorten the life of the print.

  • Don't iron the print

    Never iron directly on the design. If needed, iron inside out or place a cloth over the print.